Doors and openers
Overhead Door brand doors and openers, Legacy models included
We repair Overhead Door brand garage doors and openers in Vancouver, WA and across Clark County, from Thermacore springs and cables to Legacy and Destiny openers, as an independent shop with no tie to any local business carrying the name.
Updated
Overhead Door around Clark County
Overhead Door products are sold through distributors of the brand, while several garage companies around Vancouver simply use the words overhead door in their business names.
The brand comes from the company behind the sectional garage door itself: C.G. Johnson created the original upward-acting garage door in 1921 and the first electric opener in 1926. Overhead Door Corporation, based in Lewisville, Texas, is a Sanwa Holdings company that also owns Wayne Dalton and The Genie Company, which it bought in 1994.
This page is about the brand. We service Overhead Door doors and openers as we would any other make, and we hold no link to a distributor or to any local firm that shares the name.
Is it a Overhead Door? How to check
Overhead Door badges its doors and its openers separately, so read the door label and the opener label on their own.
- Door model numbers from the brand's numbered series, such as 5720, 5740 or 5760 for Thermacore insulated steel, or 7520 and 7560 for Courtyard carriage-style doors.
- Opener family names on the motor unit: Legacy, Destiny, Odyssey or Infinity, with numbers such as Legacy 650, Legacy 850, Destiny 1200 or Odyssey 1000.
- A wall-mounted Infinity 2000 beside the door in place of a ceiling rail.
- OHD Anywhere named on Wi-Fi models, the brand's smartphone control.
- Radio technology shared with Genie, its sister brand, so Genie and universal remotes that list Overhead Door are worth trying first.
Overhead Door models in local garages
These are current Overhead Door lines as a distributor of the brand lists them, doors and openers together.
| Model | Sold | What to know |
|---|---|---|
| Thermacore 5720, 5740 and 5760 | Current | Insulated steel doors. An insulated door weighs more than single-layer steel, so spring sizing matters when one breaks. |
| Courtyard 7520 and 7560, Carriage House 7540 | Current | Insulated steel doors styled like carriage-house doors, with overlays that must line up when a section is replaced. |
| Traditional Steel 1400 to 1600, Impression 5800 and 7800 | Current | The Traditional Steel series and the Impression lines; the 7800 puts a fiberglass surface over steel. |
| Traditional Wood 3200 series, Signature Carriage 9940 and 9960 | Current | Wood and wood-look carriage doors. Wood is heavy, so spring size follows what the door actually weighs, not the width of the opening. |
| Legacy 650, 850 and 920 | Current | The Legacy 650 is a belt drive, the 850 adds built-in LED lighting, and the 920 has OHD Anywhere as standard. Battery backup is optional on the 650 and 850. |
| Destiny 1200 and 1500, Odyssey 1000, Infinity 2000 | Current | Destiny 1200 and Odyssey 1000 come in belt or chain, the Odyssey on a 140V DC motor. The Destiny 1500 uses a patented direct drive, and the Infinity 2000 mounts on the wall. |
Common Overhead Door problems and repairs
Calls to Overhead Door homes split between the door's lift parts and the opener's safety system.
-
A torsion spring snaps on an insulated Thermacore door
We size the replacement by wire, inside diameter, length and wind, fit both springs as a matched pair, and leave the door balanced so it hangs still at halfway. Garage Door Spring Replacement, from $245
-
A lift cable frays at the bottom bracket
Wet bottom corners rust cables first in a rainy county. We replace both cables, check the drums and bottom brackets for rust, and set equal tension on each side. Garage Door Cable Replacement, from $185
-
A single dented section on a door that has to match the street
We read the series and design from the door, price a matching section when the line still offers it, and lay out a full door when it does not. Garage Door Panel Replacement, from $445
-
A Legacy or Destiny opener reverses or refuses to close
We clean and realign the photo eyes, check their wiring and the travel settings, and finish with a reversal test. Garage Door Safety Sensor Repair, from $125
-
Remotes lost on an older Overhead Door opener
Its radio comes from the Genie family, so we match an Overhead Door or Genie remote, or a universal that lists the brand, and clear lost remotes from memory. Garage Door Remote and Keypad Programming, from $105
Matching a section on an Overhead Door garage door
Matching starts with the series number, panel design, color and window layout. Overhead Door sells its doors in numbered series, so a Thermacore 5740 or a Courtyard 7560 can be matched by name rather than by eye.
Whether a single section is still made for an older door depends on the series, so we confirm it by model number before quoting. When it is, we hang and adjust it so the seams line up; when it is not, we price a full door that suits the street, which matters on HOA blocks with style and color rules.
When to retire an older Overhead Door opener
Retire an older Overhead Door opener when it has no photo eyes or strains on a heavier insulated door than it was built for; one with working eyes and a strong motor usually earns a repair.
A unit without photo eyes predates the 1993 federal entrapment standard. A later one is easier to keep: its radio follows the Genie family, so remotes for it are still sold. The springs set the load either way, so we balance the door before judging the opener.
Questions from Overhead Door owners
Does Overhead Door make garage doors or openers?
Both. Overhead Door builds sectional doors in numbered series such as Thermacore and Courtyard, and openers in the Legacy, Destiny, Odyssey and Infinity families. Its founder created the upward-acting garage door in 1921 and the first electric opener in 1926, and Genie belongs to the same corporation.
Is a local company named Overhead Door part of the manufacturer?
Not necessarily. Some businesses with the name are distributors of Overhead Door Corporation products, while others simply use the words. Ask a company whether it distributes the brand if that matters to you. Our shop is independent and services Overhead Door products with no tie to either kind of firm.
Will a new remote work on an older Overhead Door opener?
In most cases, provided the unit dates from 1993 or later and its photo eyes work. Overhead Door and Genie openers share radio standards, newer Intellicode and CodeDodger remotes work with earlier rolling code units, and the Genie universal remote lists Overhead Door. A DIP switch unit from before rolling code needs a remote set to its switches, so a label photo comes first.
Can I buy Overhead Door parts without going through a distributor?
For the parts that wear, generally yes. Springs, cables, rollers, hinges and bottom brackets are sized to the door rather than to the badge, and we replace them on any Overhead Door model. Door sections and some opener boards are specific to the model, so we confirm availability by model number before promising a date.
Can you match one damaged section on an Overhead Door garage door?
Often, when the series is still in production. We read the series, design, color and window layout from the door and check whether that section is offered. If the line has changed, we price a full Overhead Door replacement, or a close match from another maker that satisfies your HOA.
Where to go next
Overhead Door repair near you
We work on Overhead Door equipment in Lincoln, Old Evergreen Highway and Riverview, Washougal and across Clark County, at the same posted prices.
We also work on
Want a price before anyone drives over?
Call and describe what the door is doing, or text a photo of the door and the spring above it. You hear the likely repair and where its price starts, then decide.